Dress the house. Plaster "bark beetle" and staining

Atractive house insulation, I came close to the final stage - finishing coat textured plaster and painting homes. However, before you begin this pleasant work, it was necessary to zaarmirovat insulation to create a solid foundation for the plaster.

Mesh for reinforcement bought glass cloth, fine mesh. Its width - 1 m, it is very convenient in operation, plus once covered a large portion of the facade.

Clay used the same as for the attachment of stone wool - BITEX KLAR 1000. The breadth of its application allows all the work on the facade insulation.

Mesh stuck follows. First, glue is applied with a spatula a thin layer on the surface of rock wool, then (wet layer) stretched mesh.

In several places she recorded her self-tapping screws for convenience. The same tool gently "pressed" into the surface of the adhesive grid, simultaneously aligning the adhesive layer.

Pasting grid, made an overlap of about 10 cm. This reinforces zaarmirovannuyu surface, preventing it from cracking.

Angles - the weakest part, they need necessarily be strengthened. I did it with a mesh metal corners. Corners recorded screws, recessed in the net solution.

My walls were completely ready for finishing. There were minor irregularities on the grid, I'm putty of the same glue, which fixed the net.

How to decorate the facade, my wife and I decided a long time - decorative plaster "bark" was to become a worthy ornament of our house. I did not change the vendor and bought a plaster of the same company as the glue for stone wool - BITEX.

There was a desire to apply the plaster on their own, even made one batch. It turned out like a good idea, but would like to see as a result of your home perfectly beautiful. Therefore, after consulting with his wife, he turned to the professionals. We agreed with the young guys who have recommended friends. The very next day fasadniki started to work. Walls I have been filled, so the team immediately began working with the "bark". We asked them to make a drawing, "rain" (topcoat looks like raindrops).

Plaster applied guys long facade spatula.

When all the plaster work has been completed, the process came to its final stage - painting. We bought the paint, facade, color - light peach.

Painted facade rollers with a long nap. Lacked one roller for a short time, the nozzle had to constantly change.

It was necessary to paint every side of the house at a time, to paint transitions were not as noticeable. Brigade tried very hard, working late into the night.

After work I can only make out the timber and secure electricity meter on the facade.

The result pleased me and my wife. The house has become an attractive appearance and very warm inside.

Of course, not everything was perfect. There are some flaws in my work and in the work of the brigade, but it overlaps insulation reliability of my house.

History insulation, plastering and painting the house from a reader of our channel Alexander Sotniychuka

On that channel everyone can share its experience in the construction, repair and improvement of your home, suburban area, send photos, tell me about your country, house, apartment. And we will tell you about my little house on the canal. Information and photos (preferably horizontal) send to [email protected]

Subscribe to channel MY HOUSE - in front of a lot of new and interesting information!