Cleaning after repair: what and why?
After a major or even minor repairs is always a lot of debris, dust, dirt and stains on surfaces. On their own to carry out cleaning difficult, because the nature and area of contamination is different from the household, and does not eliminate the usual cleaning agents. traces of paint, whitewash, putty and other supplies necessary to remove such a way as not to damage the surface.
What is included in the procedure
Cleaning of apartments and other real estate is renovated:
- Removal of construction debris with a vacuum cleaner residues.
- Dedusting inaccessible areas, ceilings, walls, furniture.
- Floor cleaning with the help of rotary machines, the mandatory use of professional detergents.
- Dry carpet.
- Cleanse the doors, slopes, skirting boards, radiators, window and balcony designs.
- Rubbing of glass, mirror and lacquered surfaces.
- Purification chrome or products made of stainless steel.
- Stain removing paint, adhesive, cement slurry and foam.
- Plumbing purification and cleaning of bathrooms.
- Hand rubbing decorative elements (stucco, columns and so forth.) And fragile office equipment.
- Disinfection of premises and garbage removal.
Cleaning after repair can not use the usual household chemicals and household cleaners.
helpful hints
There are a number of life hacking, with which you can quickly and easily bring the room in order:
- Fine dust should be removed developer Microfiber cloths soaked in vinegar and salt water solution.
- From foam should immediately get rid of, until it withered away. Because it will have to exert more effort. Furthermore, purification is performed only by mechanical means, which may cause scratches on the surfaces.
- If on the floor, wood coatings or laminates traces of paint or varnish - they are removed by a conventional acetone or special devices, which can buy in any mass-market.
- People can use the method for the removal of putty. Cloth soaked in kerosene, and rubbed the spot after 15 minutes rinse with water.
- Rust stains after replacement of plumbing pipes or eliminated copper sulfate solution. Small foci easily cleaned with a soft cloth, pre-moistened in acetic acid (concentrated).
- Sticky traces of construction adhesive tape or glue is recommended to remove the solvent. Alcohol use is meaningless for these purposes. Should not be used, and mechanical means (scrapers, knife, wire brushes or abrasive powders), because it will only damage the surface.
A great way to finish after construction cleaning - grate wooden surface polish to give it brightness and gloss.
Following simple tips will help to quickly restore order, extend the service life of products and to maintain their original appearance.
More information on cleaning and other cleaning services, as well as subscribe to a good discount, please click here (form in the right column): https://dm-cleaning.dachamaster.org/blog/ .