The process of construction of a frame house turnkey

In recent years, frame construction is gaining in popularity, and for several reasons. First of all, this technology allows you to build an inexpensive frame house turnkey in just a couple of months. Cost construction provides an inexpensive material that is several times cheaper of the same bricks. Efficiency of construction due to the high manufacturability of the process. Below we describe in detail the main steps of the construction.

Construction of a frame house under the key. Main steps

Foundation. His choice will be driven by the type of terrain and the dimensions of the future construction. Just use the four most common types of foundation:

- Belt. The optimal variant in the construction under shallow soil freezing and heavy soils. Only one-storey facilities.
- Columnar. It consists of wood, brick and concrete, suitable for all types of homes.
- Pile. Applicable in case of peat or silt layer is observed in the soil. Suitable for two-storey cottages.
- Solid floor. The most expensive variant in which plate acts simultaneously and the foundation, and the overlap of the first floor.

Strapping and floors. After pouring the foundation it is necessary to install waterproofing. Then mounted the boards - they are located on the perimeter and placed in areas where will be built the supporting walls. Next, settling the floor and set the vertical frame rack.

Build walls. Vertical posts placed in the grooves of the waist, then proceed to cantrail assembly, which is made of a thick board or boards of small cross section. As the walls of the optimal solution is to buy the factory panels with internal insulation. However, to minimize the cost of the frame house turnkey, they can make their own.

Installation of ceiling beams. For this purpose, normally used with a section bar 15 × 15 cm.

Roofing and siding. Initially set the rafters, and already they are attached top ridge board. This is followed by setting batten, flooring and roofing insulation material. As for the external cladding, the following materials can be used for this purpose:

- Siding. The most common version, the perfect combination of performance and low cost. Good protection from all weather phenomena.
- Block house. Suffice economical option that will protect the house from the weather. Outwardly it looks like an imitation of the wooden frame.
- Decorative stone or brick. Rather expensive but aesthetically pleasing way to finish. Pleases a wide variety of textures and colors.

The process of construction of a frame house turn-key may be either the owner of the forces, or professional team. In the second case it will be able to significantly reduce construction time and to guarantee the high quality of the building.