How to make a cool towel holder for 300 rubles?
Buy a special holder for towels can be expensive, so in this article I will tell you how to make a beautiful metal holder with a minimum expenditure of time, energy, and finance.
He looks no worse yet very functional and not afraid of water, has high strength and is easily mounted in place. Also, the length of the holder can choose yourself, to accurately fit all the towels on it. And given that it is made of chrome tube, it easily withstand and other cooking utensils.
What is needed and where to get?
For our carrier will need:
- chrome tube - the main item for our holder, the cost depends on the dimensions of the tube I bought for 150 rubles;
- 2 is a stub pipe to chrome - may be plastic, chrome and even the designer, the price of 5-10 rubles;
- 2 mounting - I used the mount, which can be controlled by the length of the legs, as the holder will act on the walls, there are 30-80 rubles;
- 4 screws - and if we mount on a concrete wall, and 4 plugs.
Chrome pipe sold in furniture and construction stores, a wide range presented and on the Internet. This tube deemed to furniture production, but nobody forbids its use for any purpose.
What should pay attention to?
Immediately determine the size of the pipe, as the cut improvised means it will not work (only Bulgarian). I bought pipe of 1 meter, but the stores range from 0.25 m. To 3 meters. Also, I advise to buy it round tube - it is more convenient as a carrier.
Fasten bracket to the wall
If the walls are covered with wooden siding is durable, it can be easy to fix the holder on the short screws. The main thing to make preliminary calculations, mark a point not to get like me - the holder is attached to the eye, in the end, turned out a little uneven. Screws short length can be screwed into a screw-driver, if there is no drill.
See also:
· Tax on mobile phone? Who will pay and how much?
· How to clean a chimney? Folk remedies and personal experience
· Important tricks when working with assembly foam
If you are going to mount the holder on a concrete wall or tile, it can not do without the gun, be sure to need and expansion.
That's all the time I spent nothing at all: 5 minutes to the assembly of parts (insert the plug into the pipe), and 5 more minutes - on mounting.
The main question - how much I have saved?
Here is a holder I found the online store, it differs only in the form of attachment to the wall, it can not be adjusted, unlike mine, and even the cost of such holder starts from 2500 rubles!
I spent less than 300 rubles, honed skills tightening the screws with a screwdriver and incredibly proud of myself and my towel holders. Waiting for your estimates in the comments!
©Julia Ivanova wrote an article specifically for the channel ZikZak