Circular saw for beginners. A pair of receptions

The most common operation for manual conveyers - it's trimming and cropping to size of boards, bars and rods. And convenient to do this operation with the help of simple tools.

This small fanerka 6-10 mm thick, bolted to the bar edge so that plywood and the edge of the bar have a right angle.

When using this device the bar is pressed against the blackboard and saw to the plywood and so easy to cut the board at a right angle.

By the same type, you can make arrangements for the facing at any fixed angle. It may be useful, for example in the preparation of the rafters for the roof.

Another technique, which would like to talk about is the connection in a half-tree, made a circular saw.

For such compounds cutting depth is set at exactly half the thickness of the bars to be connected.

First is propyl (Or cuts, where the compound is in the middle of the bar) the edge connection.

You can use the device for trimming mentioned above.

Then, on the part of the bar you want to delete is done a number of cuts. How often you do decide, but more often it is easier to get to sample.

Further it is possible, tapping with a hammer or chisel podlamyvaya, remove napilennuyu portion. In view of the structure of wood, such parts are easy to cleave and remains only to clean up the sample chisel.

On such connections I made the base for his first bench saw, hand-made on the basis of conveyers, and the basis for the pasteboard.

By the way, check out the article: Sawing machines from manual conveyers. Blueprints

If you continue to talk about the hand-held circular saw, then when you install it on the table the possibility of increased many times over. And this will happen next on the channel.

Thank you for reading. I will be glad of your support in the form of a husky and a subscription to the channel.

Alexander.

Other publications in the channel:

A circular saw. Simple things for beginners

Simple grinding drum. My version.

As to the circular saw to make a decorative cover

On a note: All the articles of the channel based on materialsmy site -"Joinery"