Masonry formwork under Laying nets. small units

Always I thought that the smaller units are, the easier to work with them. Yeah, schschschschschaaas ...

👉 And so, I continue to do in his house Laying nets. About how I prepared the constituent elements, I wrote in a previous article.

It's time to do the masonry.

We have blocks 100h100h625 for external hand and 50h100h625 for internal.

"Small, lightweight elements - easy to lift and put on top. Ties from the previous close do not need no sense. It remains to quickly put them on the glue and you're done" - I thought... 😎

But it was not there.

1️⃣ It is more difficult to put on glue.

It is difficult to catch the desired consistency of glue. Too liquid - block floats thereon as r... If thick, then because of the small weightIt takes a lot of effort to seat unit.

2️⃣ We need a level in all planes.

When I was lecturing the walls of the 300-th block, each block is checked in two planes.

And here it is necessary to expose the outdoor unit, check the level in length and width. Then just put the inner member, and check that it is in level with the outside.

That's how you catch the right position ...

3️⃣ Too fragile.

I understood at onceAs little harder pristuknul unit.

When masonry walls I could attach a mallet very well, and the maximum that was - a small dent on the block.

A 👆 with such thin elements, Mallet does not fit. Only hand clapping.

4️⃣ More elements - more work.

It's like a puzzle. What is easier and faster to gather, from the 100 or 1000 items? In the same way here. Though physically of course easier, but time is spent more.

But in the end, the main result has been achieved.

Then the next stage - Reinforcement.

Put huskies and 👍 🔹Subscribe to KANAL🔹, not to miss the next article.