Under the metal crate. Valuable tips that I have tried myself.
From little things is the whole process, any job. And the more nuances you know, the easier the process becomes.
In the last article where I wrote about plane under the metal lathingI mentioned about the theoretical advice "professionals" that the real construction site have no relationship.
✅Segodnya also want to talk about things, that really helped me, and I in the sky experienced their favor.
🔹Shablon for lathing step.
This is one of the major adapt, which should be during the installation batten.
The main thing is that it allowed me to do the same.
- In total it took three templates, two on the edges of the roof and one at the junction of the boards in the middle.
- We put the template (I temporarily fix them on the screws), and just put on top of the next board.
- Well, all is secure.
Kinds of patterns can be much, it is important to only one thing:distance should measure from the bottom to the bottom of the board.
If the template will delay the distance from the top, then you will leave exactly on the size. And all because walking boards +/- centimeter width, and bottom of the roof to the ridge can coming up much.
🔹 control from a single point.
But even doing all right, and the meting out of the Nizam, you need to control yourself. Each meter and a half, I measured out the distance from the first, the bottom of the board.
And most interesting is that this is not done in vain.
On one slope, constantly starts to leave one end of the batten. And timely adjustments, was not allowed to accumulate error.
🔹 mount in Extension.
It is also an important point that needs to be done.
Joint, in any design - it is always a weak point. And the "checkerboard pattern", allowing it to strengthen. Especially because of difficulties it is not.
🔹 first crepe, then saw off.
And yet, that has facilitated my work - this whole mount boards.
Although I think this is the only adequate alternative.
- Taking into account the curvature of the counter-rafters and
- Considering how to install chess.
- And most importantly, you need to crate hanging from the gables, the same distance.
❗ Measure once the desired length simply does not work, at least accurate.
Therefore, I will first set the whole crate.
And then, quietly marked out and sawn off unnecessary circular saw.
So the main thing - it is the first number.
like treasure in the walls, The biggest fuss was in the beginning. And after the first board and with each subsequent became easier.
💥SUBSCRIBE TO THE CHANNEL💥 and put the Huskies 👍. We move on and just in a good mood.