Overkill. About homemade 3D Fraser.

When I first met with this home-made device was then was struck features and well thought-out machine.

Machine made of plywood. A key feature of the machine - it is possible to move the router, which is fixed in the device, in three dimensions, both on the CNC.

The author of this self-made 3D router - Suso Caamanho (Suso Camagni) from Spain. On his website You can also find many other home-made machines.

And this machine was made as a way to speed up the work for simple and non-recurring projects. Such projects are often made on the CNC, but the preparation of such a project might take considerably more time than the actual manufacturing.

Now, about the possibilities of the machine. It is made with a clamping ring to 43 mm, so it can be installed as an electric drill with a 43 mm neck, and routers with the same diameter neck.

This machine can be used as a drill.

As grinding.

When installing the router in it, you can make the machine slots.

slot length is set on the front limiters horizontal axis.

Also with limiters are configured on the front side and the machine axes, can be cut rectangular parts.

Milling depth (as well as drilling) is also set.

This machine can be used as a copier for flat shaped parts.

A simple tool allows you to cut circles.

And on this machine, you can copy and three-dimensional patterns.

here in this article on the author's website you can see 8 videos of all stages of manufacture of the device. Also, there is shown an example of use of the machine for producing electric housing.

Thank you for reading. I will be glad of your support in the form of a husky and a subscription to the channel. And look for other posts on the channel.

Alexander.

P.S. We also invite you to your site.