Useful content

I do mauerlat of boards. Barely "pulled" on his studs.

click fraud protection

Apparently the "Eye-diamond" - this is not about me. Or all have such problems?

Starting with the foundation, and then to the masonry walls, I always tried to do everything as accurately as possible, but it was in all the papers inaccuracies. Of course there are always small errors, but their extent and their impact on the number of complexity of the work.

It happened when installing mauerlat.

Still when installing studs, before fill Laying netsI saw that everything turned out imperfectly.

And accordingly I was ready to difficulties in installing mauerlat. But apart from this were nuances.

Lifting boards.

As is clear from the title of the article, mauerlat I component of the boards 150 to 50, 100 high and 150 wide turns. And one of the criteria, therefore I chose this option - It is an opportunity to raise all the upstairs one.

As I worked with a beam, I can not imagine. Even with these boards, I helped my other half. There is one thing all went upstairs and the other all move there and to stand as needed. Alone - it is certainly difficult.
instagram viewer

Marking.

Here, too, to do everything efficiently, you need a few assistants.

  • Put boards on top of each other, to align.
  • Mark the holes and drill.
  • And then all together or separately (but all shifting), put in place.

But in my case, too much traffic - a lot of problems. So I put the board on both sides of the studs (respectively top and bottom), And mark and drill them separately.

As you can imagine, with such a system, accuracy can not be expected.

Moment of truth... Without the hammer can not do.

Not exactly smooth studs + = same hole installation problems.

This is the formula of my work. But in fact, not so bad it was, as it might seem. In two places, I had a very strong knock in one place even widen the hole, and the rest in pritirochku, but sat down.

Here I suffer ...
Here I suffer ...

As a result, the main thing that all nalezlo😁. The most interesting thing is that as I did not watch the video or read the information at all all turns out well and easy.

Does anybody these difficulties do not arise?

I think about them, you need to write in the first place... (If I am not the only one, respond to comments)

In general, three nights spent at all. But that's not all the nuances of this work.

💥Subscribe to KANAL💥and put the Huskies. Samostroyschik continues its work ...

Homemade product to simplify work with angle grinders

Homemade product to simplify work with angle grinders

Hello everyone, homemade comrades. Today we will make a universal device for angle grinders, whic...

Read More

Sow pepper and tomato seeds with hydrogen peroxide. What are the advantages of the product

Sow pepper and tomato seeds with hydrogen peroxide. What are the advantages of the product

Hydrogen peroxide is widely used not only in medicine, but also among gardeners. Many people soak...

Read More

Made the simplest multi-tool from two bolts and a spring

Made the simplest multi-tool from two bolts and a spring

How to make a multi-tool from regular bolts and springs?Today I will show you how you can make a ...

Read More

Instagram story viewer