I put a beam on the studs. An unusual way to make holes using a grinder.

In an unusual there is nothing supernatural. So do not wait for a miracle ...

❗ But unusually, be exact.

I wrote in one of his articles about concrete beam over a spanI poured myself. And there I was talking its questionable reliability hold large additional loads.

That's why she needed extra boost.

And I, too, provided in advance, and with reinforcement He laid the studs, the length of which was greatly larger than that of pins under mauerlat.

And now it is time to use this length.

At first I put it on this beam, "as if mauerlat", but in fact - it's just a layer of two boards, which compared mauerlat outer and middle wall in one plane.

✅And now all this I will put floor beams 100 to 200, as you know edge. But for this, and needed such long studs.

❗ But timber is made of two boards 50 to 200. In this embodiment, the beam is much easier to work with. And when you're doing yourself and one - this is very important.

But the main objective was to put it all on the studs.

And here I have done without the drill.

• First I pulled the board up, and put them on opposite sides of the studs.

• Then place spaced studs pass.
• After did groove boards for possible connection. Did all the usual grinder and cutting wheel for metal (yes, to drive the metal sawed tree). And he did so because of the inconvenience to use a circular saw. In this case, angle grinders much more maneuverable.

Dymoval Of course it is very decent, and the disc began to crumble, but somehow four grooves made. Now it was all put together.

Everything came together perfectly, but it was an important moment.

Screed boards.

And the importance of that connection must be very reliable, so that during the crackdown, at a reduction of the beam, the board did not disperse.

Therefore, in the stud area I did Reinforced fixing.

And of course additionally punctured entire beam 120 mi nails is folded on the back side.

❗ Now, concrete and wooden beams - a unitary structureThat will work together.

And about what I'm going to load it, read the following articles ...

Put Like 👍and Be sure to signper channel, so that nothing is missed.