How to Inlay Jig machine

Inlay - a decoration product designs and images of the material different from the core. When the inlay is a tree on a tree is called intarsia.

Further, examples of the special case of intarsia, when done one insert from the other species of wood.

To make such insertion is possible by means of jig machine. To do this, select the material for the insert and the main item to paste the template.

Further, these parts need to bond together. I used to do two-sided tape.

for hole saws better positioned so that it can later be easily concealed.

Then simply Scrollsaw both sides of the package. There can go two ways: to saw vertically, and the resulting gap hereinafter putty sawdust from the same tree construction adhesive mixed with PVA.

Bear in the beginning of the article is inserted in this manner.

This type of filler I use quite often. Only need to mix sanding dust or sawdust from a jig machine is with the construction of PVA. He is easy to sand after drying and staining hardly stands out from the surface of the product.

The second way is to cut with saw blade tilting at 1-2 degrees, then insert it turns denser. Here, the material for the insert must have a greater thickness than the main product.

In this case, I sawed it with a slight angle. After grinding leveled insertion of the major surface. Mostly it is a small space, which I plastered.

Opening for the saw blade has been done on the site of the beak of a swan and successfully been plastered and painted over.

Both of these paths can be successfully used for the production of inserts of different types of wood.

Thank you for reading. I will be glad of your support in the form of a husky and a subscription to the channel. And look for other posts on the channel.

Alexander.