The actual consumption of adhesive and adhesive-aerated foam. What should I expect?

Finally, the walls of the first floor are ready. 12 rows and you can share real-world experience.

Building materials should always be taken with a reserve, know it all. And at various construction sites will be a different flow. And it all depends on the workers.

💥 Since I do everything myself, and one I can speak for myself.

Consumption in the hands of a novice.

1️⃣ And so, in 12 rows I was able to put 21 pallets with gas concretes. This is 37, 8 cbm. Remove waste and some remaining blocks 36 and take the clean unit cubes.

2️⃣ During this time I spent 40 bags glue 12 cylinders -Adhesive foam, and 10 cylinders foam.

🔼 The average consumption of glue -. It is 25 kg per 1 cubic meter. It turns out I had to spend 36 bags, if used only glue.

🔽 And on the adhesive foam Set consumption: 1 bottle of 12 cubic meters block(I used just such a).

It turns out, 36 cubes I spent the blocks I had to use only 3 foam cylinder, Again only when laying the foam.

So I spent far from the calculated value, which indicate all manufacturers.

Where all go?

❗ Clay. It falls when applied, squeezed at stacking blocks remains on the walls of buckets, etc.

❗ Pena. It flies away from the wind, reapplication for adjusting units, etc.

And all of these seemingly little things play a very importantThat no manufacturer can not be taken into account. And most importantly, how will you, too, can not be calculated because "rukozhopost" all its own. 😆

✅Therefore, only practice will show real results.

👉SUBSCRIBE TO THE CHANNEL👈 and put the Huskies. hope someone my experience will help all to consider zaranee.😎