How quickly weed beds in the garden? Remaking Manual drills

Greetings to all visitors and subscribers to the channel "Podelkin"! I have already mentioned that I live in a small village and, of course, at my disposal a large garden, which must be processed. The main part I sow the grain, and the remaining land (20 acres) are used for growing vegetables. Probably one of the most difficult and important tasks of every gardener and gardeners weeding a garden, because without proper care to get a good crop simply will not work. Today I will share with you how you can quickly weed beds in the gardenWith just one nozzle for hand drills.

For planting corn, peas, fodder beet and I have a hand drill "Vinnitsa" Ukrainian production.

Thing is very useful, but it is used only 2-3 days in the year when planting. That it does not stand idle in the shed, I decided to use this design for weeding the garden.

For this I required to make a one-nozzle blade from a metal plate of 2 mm thick.

The width of the nozzle (30 cm wide weeding nozzle row spacing can make greater width), height 20 cm. On the sides are made holes for fasteners. Metal bent manually.

To turn the drill into an instrument for the control of weeds, I removed her extra details: grain tank and chain opener (then all easy going back).

And secure her a homemade knife attachment with bolts, in a place where mounted handle.

At the end of the sharpened tip grinder on both sides (when the front side becomes blunt, you can simply turn the nozzle).

The result was the same hand cultivator, with only two wheels. The rear wheel, I did not take off, as it does not interfere with the weeding.

With such a tool to fight against weeds is much faster and less labor intensive than conventional chopper. To weed the garden, do not have to bend and exert a lot of effort, you just need to go ahead, making the movement of his arms back and forth. Nozzle not only cuts the weeds, but also loosens the soil. Even if you have no seeders, do such a structure is very simple from the wheel of the child's bicycle, corners and pipe diameter of 1.5 - 2 cm.