Stand for eggs "Easter bunny" plywood
Very soon there will come a bright holiday - Easter, so I had already started to prepare for this day. I would like to have time to do a lot of beautiful handicrafts, which will decorate the holiday table. Today I'll show you how to make a small stand for Easter eggs.
On the Internet there is a drawing of the stand, but he was in poor quality, so I had to edit it a little and split into two A4 sheets.
Ready drawing for plywood glue 4 mm thick and 1.5 mm drill hole drill in all internal grooves and patterns. I used for cutting saw blades Ultra Reverse №1, of which I spoke here. about methods of applying a drawing on plywood you can see in my previous article.
And so, the preparatory step is completed, proceed to the cutting out and normally start with internal elements. The process of cutting out, you can see in my video, which is located at the bottom of the article.
As a result, you should have 4 parts: rabbit, stand and two legs. I started to cut a rabbit - the most difficult part, which contains many small elements and patterns. On his sawing it took me most of the time. All the work took about 2 hours. If you want to stand fast, it is possible to saw a silhouette of a rabbit without patterns.
After cutting out the details required to grind with sandpaper and proceed to the least important part - the assembly stand. No matter how hard you try, but ideally not be able to cut it out all the slots and connecting elements (accuracy at least some, but it will be), so they have to be customized by the size manually. For this I use a small nail file (sandpaper glued thin strips of plywood).
The assembly starts with a rabbit. If the item is bad enters into the groove, then gradually sawed it, until the connecting element does not fall into place. But much rasp also not worth it, the item must be connected with little effort to mount was reliable. After the rabbit will stay in its place, remove it and go to the legs.
We turn the stand and in the same manner customize the size slots with legs connecting elements. You should begin with the legs, which has a slot at the bottom.
After that insert the second leg.
And at the end of perching on the place of the rabbit. Items can not stick together with glue, to be able to dismantle the product and in a compact way to remove it on the long-term storage.
More detailed assembly process, you can see in the video below. That's all. If you have questions, ask them in the comments and I will gladly answer them.