A circular saw. A simple way to trimming

The need for trimming at the boards are not an uncommon task in this publication, I will talk about a fairly easy way to do it

Typically, how do cutting edge - draw a line on the board and cut the saw along that line. It turns out the rough cut, so how to saw through the absolutely straight impossible. After this cut must also jointing edge.

There is another way, which allows you to get a smooth edge once.

Consider the example of his crop here is a plaque:

This method uses a circular saw rip fence and that normally lead the board on the fence need to make one edge straight.

To this end, along one of the edges of the uncut board is screwed flat bar or fanerka so that the edge of the fanerki out beyond the edge of the board.

Next, measure the distance at which you need to put the rip fence and cut the board.

Fanerka is along the rip fence.

The result is a smooth edge board.

Now you can unscrew plywood and already on a flat side of the cut side of a second board.

Thank you for reading. I will be glad of your support in the form of a husky and a subscription to the channel.

Alexander.

Other publications in the channel:

Device for the router. Production of bent backs and not only

How to make a simple jointer of a circular saw

As to the circular saw and mills to make a plinth

On a note: All the articles of the channel based on materialsmy site -"Joinery"