As I built the house. Wall insulation.
I continue the story of its construction. Let me remind you 16 July came to a turning point, when it was necessary to break the earthen extension.
Wife and daughter sent to her parents, mom to her older sister. All things are unloaded in the main house in a room of 12 m * 2 and called to help his nephew, broke extension.
July 20, I started warming walls. Immediately offer watch a video clip about it during the construction phase and continue below.
Select a heater be challenging, but every problem is known to solve the division into smaller tasks, which was easier to solve.
So the foam and such "solid" insulation I immediately ruled out as tightly put them in my frame was not realistic. Further study of insulation of mineral wool and glass wool, I discovered an amazing thing for me - most of these heaters are made using formaldehyde resins. I began to study the issue further and as a result opted for brown the insulation Knauf.
In fact, this wool, but made so that it can be easy to take hands, it is easy to cut, after compression easily returns to its original shape. It was fun to unpack the bales of insulation: Chick knife packaging and clap a pack appears two times more than before. And besides, the manufacturer claims that the production of formaldehyde is not used.
The very process of warming in general is not difficult. First obbivat wall windproof film. Further, the three layers with the insulation sheets installed overlapping and "tacked" internal "protective film. The main tool was a sharp knife and a stapler.
To it was convenient to insulate the top of the wall, I made a couple of ordinary goat. The only difficulty that arose with insulation, is the installation of a third layer. Some lists top strove to fall, particularly in the framework of wide openings. Due to the doors and windows are not all the gaps between the pillars were obtained by 60 cm. In these cases, I started nailing protective film and subsequently installed fallen sheets, then pressed their film.
Although the manufacturer of insulation and argued that it is pleasant to the touch, it is still present fine dust, so it is best to work in a respirator, goggles and gloves.
Previous parts of this story:
As I built the house. Installation of windows.
As I built the house. Roof.
As I built the house. Openings of windows and doors.
Continuation of the story will continue on the channel.
I invite you to subscribe, comment and put the Huskies. I will be glad to communicate.
Alexander.