Production of Mittlayderu greenhouses.

Last year, in the spring of purchase greenhouse completely smashed, dropped out in early March snow - more than 30 cm of wet snow per day.

That's the frame looked after their removal from that of polycarbonate.

And that given the fact that inside were props.

The new greenhouse has decided to do their own. For the manufacture of Mittlayderu chosen design. Such greenhouse has several advantages over conventional, this main upper airing that It creates a special microclimate and overheating in a greenhouse does not happen and another time place in such a greenhouse more.

The project is first produced on a computer in SketchUp. Then, the board 25 mm sawed strips and assembled framework elements.

Polycarbonate sheet 4 was purchased. Although this greenhouse the size of 3x6 meters need to 5 sheets, for I have used polycarbonate gables of the old greenhouse.

The site where the greenhouse was installed is not quite smooth. To align the structure and to rail is not buried in the ground, I used galvanized profile from the old greenhouse. It dug into the ground, and by him to fasten the rail.

greenhouses skeleton collected sequentially from the gable and then setting the rack in the project in order to receive a length of 6 meters.

The better to work made a simple ladder (in the photo it is visible in the center). Stepladder was universal helper, and not only for the greenhouse. In the summer of spun down the steps from the step-ladder parted the side stand 3 meters screwed a couple of long boards and on this design proved to be very convenient to wash carpets.

But back to the greenhouse. Polycarbonate is screwed to the roof screws. With leaves on the roof had a little tough, as threw a long list and had to wait another sheet of calm strove to fly.

The greenhouse was surprisingly strong. I immediately checked her with his weight.

In the summer it checked the hurricane. In late June, I flew a good wind felled trees by the roots.

It is 800 meters from my house. And not far from the house and tumbled down a lot of poplars. Greenhouse also suffered storm well.

When the wind greenhouse door was closed, the top vents open and... The photo shows from left ladder and boards - they all fell.

Winter she also endured well. My mother, in spite of the fact that even in the garden drifts already started to make the beds in the greenhouse.

If interested, I suggest to watch a video about the production of greenhouses, from design to completion.

For those who are interested here is the link on the project. This is the file that you can open in SketchUp. The program can be installed on your computer, or try online at this address.

Alexander.