Pillow foundation. Sleep and utrombovat alone, is it real?
On the experience I realized that all excavation work - this is a very difficult process and takes a lot of time, especially when all you do with your hands.
Therefore, since the foundation of the pillow to sleep, I had not expected that quickly cope with this.
Everything was done gradually and steadily ...
- first I were transported in a wheelbarrow of sand piles.
- then all the leveled area
- all the sand shed water well
- and only then rammed
And all this was done in layers.
The hardest thing was that the work was done by hand.
But I do otherwise, even if desired, could notSince even by renting a rammer, it's all the same is impossible to do everything alone, even for a few days. A long-term rent of technique would have been a very expensive.
But I knew what to subscribe ...
Therefore, gradually, little by little work to do and I gradually fall asleep and rammed the excavation to ground level.
But the pillow gets about 30 cm., This was not enough, and wanted to raise the house above the whole area.
And here stood up for me the main question:
both eventually bring the whole area in a flat horizontal position to set the formwork on it?
Here I decided to act in reverse.
First I put the formwork into the horizon at a certain level. Those. turns out she stayed on pegs and, as if hanging in the air.
And after that I have to fill up and pressed a pillow to the desired level.
In my opinion, it is much more convenient than to level such a large area without beacons.
Drawing conclusions from all of this I can say:
Hand tamper, in my opinion, the quality is not inferior mechanical. but of course time is spent much more.
And of course it all depends on your motivation, or even from something.
You know, maybe I was turned, but I had the satisfaction of doing all this, especially knowing that all this is really to build with their own hands.
But in front of me waiting for a lot of interesting ...
With your subscription, and a lot of likes for my Drood ..)))))