Useful home-made from a plastic bottle and syringe
Quite often in the summer we go to nature to barbecues. And well, if the vicinity of the place of rest there is a river or lake where you can rinse fat from meat hand. However, it happens that the nearest body of water away and hand wash is necessary.
Today I will tell you how out of the ordinary plastic bottle and syringe build a compact portable water dispenser which can always take with you, because it does not take up much space and is fairly easy weight
This idea is certainly not new. but I think many people do not know about it. To begin, take a syringe and using stationery knife cut off the one end to which a needle is worn. Cropped not very peepka and end completely, to get the tube
Daleo take cover from the bottle and do the hole in it equal to the diameter of the syringe. Sticks a syringe into the cap and make sure we fix on the hot melt adhesive.
It left a couple of manipulations with a plastic bottle. It is best suited for our purpose a five-liter. She cut the bottom and screw cap with the syringe.
We had a kind of vanity. Of course it has to be hung upside down like a tree and filled with water. To do this Do the side of the bottle a small hole in a tree trying to drive a small nail and hang it on our vanity.
Its working principle is very simple. You push the plunger upwards and then immediately water starts to leak. After the water pressure the piston is returned to its original position.