How to drill a hole in the tile
It often happens that there is a need to make a hole in the tile from the tile.
Its enough to make it easy and simple. But all this must be done with extreme care, otherwise the material of construction of the tiles can just crack or split.
To drill a hole in the tile, You first need to mark all the places of future openings by means of, for example, a marker of some bright color. Then these labels pasted masking tape or adhesive tape. This will prevent the drill from slipping tiles.
After surface preparation can proceed directly to the process of drilling. In such cases usually use a drill with special tips, often pobeditovymi. After most tile in the hole already done, the drill bit can be changed to another, is used for the material under the tile.
Drilling should be carried out with the impact stop to punch or drill. Need to make holes at a low speed gradually while increasing speed. When the hole is completely drilled, tape or masking tape can be removed and begin to install the wall object.