Trimming linoleum near the walls. Master OK
Greetings! We continue to consider some of the nuances of laying linoleum. how trim the linoleum near the pipes I wrote last time, and now look at the trim at the walls. This is perhaps the most fitting idle operation, but also have their own subtleties.
To solve the problem acute need construction knife with no bendable blade and a metal ruler or a linear flat plate.
I for this purpose keep the old steel elbow. It is made of steel, because tried to work with aluminum and then regretted. For a sharp knife to cut the aluminum is not the problem - the blade when going along the line of clinging to it, and has done a recess in the end gon spoiled.
Wooden ruler and rails for cutting - not the best option, as the wood is soft and can be seamlessly with the timber cut a piece of more than necessary, so that even a plinth not override.
Tips:
1. I recommend tuck excess linoleum on the wall and press the line as close as possible to the corner between the wall and the floor.
2. Cut strictly perform repeating wall profile and holding a straight line.
3. Even if the metal line or length of the strip, it is better to make cuts of 20-30 cm and rearrange the arm and the ruler. This is important because the long press line the entire length of difficult, but also a long line can not normally be repeated bending of the walls.
This, the last picture was taken after the completion of laying and installing baseboards. But it was still difficult Phase trim from the door and the threshold Lutkov. This is the next time.
If the article has been helpful, place the Like. For further insight with practical articles sign up Canal.
Read more:
The new trend in the finishing slopes
Weak pressure for no apparent reason. We solve the problem!
Warming inside - technology or stupidity? Master OK
Flexible hose, which should be discarded. Master OK
Cracks in the insulation of facades. What is the reason?