Installation of PVC windows. 3 How to remove the glazing beads and glazing

We continue to view the installation steps of the plastic window. The time has come glazing beads and remove carefully pull the glass with frame. It is possible to reduce its weight and allow the installation to hold with just one hand.

For podkovyrivaniya glazing beads can use one of the spatulas with slightly smoothed edges or a knife without sharp corners. The preferred steel work hard for me spatula on a 3-4 cm. Other tools will be needed only if the primary somewhere lost.

shtapiki I starting to withdraw them from one sideSince they are the longest and easiest to bend in an arc when pulling out. After removing the side, the lower side podkovyrivayu captured lateral bead, then just pull out the second side and the top. Upper is better to pull out the last to loose glazing falling out prematurely.

On picture 4 show why you should not afraid to insert a spatula between the frame and glazing bead until it stops. The fact that each glazing bead has a mounting stud, on which trowel will not work. So worry about that glass can damage the trowel when picked bead reasons not.

Taken out shtapiki stands as a mark not to mix during refitting. For this is useful marker or the usual simple pencil. After removing the upper bead slowly pull Glazing (Photo 5)Which usually easily fixed plastic spacer plates. They are easy to remove with your fingers or pushed otvertochkoy.

In this case, the double plate and 4 pieces: 1 st on the right and on the left and 2 below under the glazing. All of them, I also pull out and save to the installation of glass in place after the installation of the frame, as well as write.

Under filmed glazing desirable podstelit something soft to avoid damaging the package at the end of the sealing glass layer tape.

That's coped with this task. Now, first of all it is necessary to adjust to the dismantling of the old windows and repair of concrete lintel above the window.

Downstairs there is a reference to article 1 and 2 of the installation.

Evaluate material andsign upCanal.

ANDit is interesting:

Installation of PVC windows. Remove flap № 2

Installing PVC windows inside and out. №1 screwed handle

Replacing the crane Majewski on the ball in the radiator. We prepare the system for the winter