The more you can align the wall in the bathroom

To provide a quality repair in the bathroom, you need to be well prepared work surface. Especially the need to closely approach the alignment of the walls, because otherwise reliably and beautifully put them facing the coating will not succeed. What materials will be able to align the walls in this room? Options are not so much.

1. Plaster for walls leveling

The classic material for leveling the surface is rough plaster. But just bear in mind that to work in the bathroom will suit not every composition. You need to use cement plaster. Its water resistance is higher than that of gypsum.

For surface application material purified by the old finish and contaminants, and then primed. If the plaster layer should be thick, fixed plaster on the surface of the grid. Then the solution is applied and smoothed its rule.

Usually do not need a perfect smoothness, because in the future to fix the tiles is also possible to compensate minor irregularities. One needs only to adjust the amount of adhesive under the material.

2. Putty in the alignment of the walls

In principle, the urgent need for the use of fillers is usually not. It is used in situations where the wall must be perfectly smooth. Taking this into account, to the putty should apply only under the condition that the future owner is going to either paint the walls or laid on their mosaic. Since the paint in the bathroom is used infrequently, it remains relevant only to the second case.

SHpatlevku better applied to the pre-plastered surface, a pre-treating it with soil. Thin layer fillings deliver substrate from minor height differences. After shpatlevanija walls are also desirable to wipe the skin.

3. Installation of gypsum boards

Oddly enough, in the bathroom to align the walls can be used drywall. Only once have to take into account that in the future to lay on such a lining tiles can not. It's too heavy. the drywall itself must necessarily be moisture-proof, otherwise it will deteriorate rapidly. Or it is mounted on the frame, or by means of adhesive directly on the rough surface. Then, on the drywall can be pasted wall panels, cork tiles and other water-resistant, yet lightweight materials.

Owner, considering their own situation, for sure stop at the optimal method for leveling. Then, with the finishing works will be no problems.