How to install a filter in front of the washing machine

It's about the strainer with conventional cartridge, winded from yarn and collects mechanical suspension. is a filter the typewriter so that to him and to the tap water supply to the machine is freely accessible.

All work on the threaded connections spend with FUM tape.

Water pipes and sewage laid in one Stroebe, however both outputs are close.

The first thing that started - set in MRR output coupling (female coupling) boo an externally threaded sleeve (MPH) soldered with a piece of pipe, which could then be soldered fitting. Then I come in handy key Snap N Grip.

Thereafter, two crane mounted on the filter flask. focusing the arrow direction of the water supply lid on the flask inlet valve installed with compact pen-tie to be used during cartridge replacementAnd, on the other hand set I tap on the washing machine with threads 1/2 and 3/4.

Later, however, turned the tap for machine down to a flexible hose stiralki approached from below. Handle "Butterfly" are chosen specifically because "box" is longer and a bit inconvenient when closing due to the size.

Yet a little tinker with soldering pipes and turned here such uncomplicated design (photo 5). Total coupling using 2 MPH, 2 knee 90 c., About 1 meter 20mm polypropylene tubes. The flask was attached a pair of conventional screws with dowels, in Drill mezhplitochny seam.

Downspout machine missed for the filter tube, it seemed to me the most convenient and hose machines went down. In this position, they do not intersect and are confused.

After installing the machine in place, the top shows that the neither that nor nothing prevents. Crane washing machine costs almost flush with the body, so it is very easy to use.

Evaluate material and sign upCanal.

ANDit is interesting:

Holder showerhead. Why choose this as established

Sticking decorative corner of the arch and slope. What glue

I bought screwdriver 31 to 1. Now I think that it is possible to turn these bits