Can I remove superglue and how? Experiment 8 materials
The easy way out - the desired conditions to solve the problem. But if he is, in case of contact quick-drying (second) glue based on cyanoacrylateFor example, in the leather bag, dress or lacquered furniture?
I am not a skeptic, but hardly believe that you can remove with superglue 1) tissue or 2) Skin. Another look, if I can get him off 3) vinyl wallpaper, 4) the laminate 5) linoleum, 6) Rubber 7) plastic and 8) varnished wood.
I have at hand bottle of 50 mm medical means Demiksid. As news of his alleged "miraculous" properties of the solvent, specially bought for the experiment! He walked in 40 rubles.
make a move
All samples caused a bit of glue and gave it to dry for 60 minutes then I began to wash.
All wetted materials Dimexidum and realized that if something is in and out, it is not fast. so I passed 1 more hour and then I began to work on the line with every model.
In the photo above has a total of: left I spread those materials where Dimexidum not coped with the task or cope too well, and on right - those that showed in general, a positive result.
Based on materials
1. Leather. As I predicted, skin superglue normally not retired: soaked spot, the crust gone and the skin became soft but should stay dark that I disappointed (photo 3).
2. The cloth. With Takanen general failure - as it was oak, oak, and left. I took the entire cloth dipped in the solution for 30 minutes, and anyway not helped. Fabric, however, was a semi-synthetics and show nothing.
3. Lacquered wood. She most of all I liked - the glue to delete, but with clear varnish. Nail turned into a kind of gel. So, you know Dimexidum drives and nail!
4. Plastic. For example, take a piece of PVC panels. Here is the result, but it looks like 60 minutes limp only the top layer and it was necessary to wait for more and more, and did not want to. Attributed to the plastic "most successful"Samples.
5.Rubber. Since the rubber elastic, slightly softened by a solution of adhesive was able to remove the solid crust - flaked off almost without a trace, but they then removed.
6. Linoleum. With him, too, everything is in order. Again, if for the first time, the adhesive does not leave, it is necessary to delete one that is "thawed" drip Demeksida even walk.
7. Laminate. Issues are not caused. Normally all of the solution and after vigorous rubbing with a cloth to remove it failed. I put "plus".
8. Vinyl wallpapers. Glue them in an hour and went limp it somewhere 80-90% it was possible to remove, The rest is almost invisible. But the Dimexidum impregnated fabric through, and then rub on the wallpaper so it is necessary to very carefully. In general, remove the glue is almost impossible.
I draw the line
Friends, I have tried to deduce the adhesive through hour after application and it was not easy. So in the time display will still be problematic. With absorbent materials normally can not take him, and with polymers - can only be need laying on top swab moistened with a solution and remove the adhesive gradually over time and drip solution again. This is how! I am waiting for your thoughts.
Evaluate material andsign upCanal.
And it is interesting:
The simplest remover of isolation from wires of clothespins
2 ways to recover the precipitated sockets and switches in place
3 a method for replacing a mosquito net pens. Simply nowhere!