Mouse Renovation: two one after 10 minutes! Master OK

There are two mice, one of which is broken wire, and the other leads optics. The one with the broken wire directly from USB-connector, to repair difficult, so try to restore the mouse lens problem.

A little earlier was an article as a clean the mouse for 10 minutes while the cursor jumps.

Although outwardly they are different stuffing them in many ways similar. I will try to remove the optical lens with a mouse with a broken wire and put it on another.

Disassemble almost nothing, because the body is only one screw. Unscrewed the cap and took his charge, and remained the most necessary, we work on the bottom of the lens cover.

So does the second mouse: dismantle and pull out the lens. When I compare them, I realized that a little different in size and shape. Downstairs they close up. Before installing the optics must be carefully wiped dry with a soft cloth. It is best microfiber.

Typically, the working optics, a little shorter in length.

When Replace the broken Optics another, it turned out that the difference in the configuration - no problem. it has become normal and pressed against the bottom of the card body.

instagram viewer

Speaker transparent triangle near the LED on the right - this is the lens. Its bottom under the card.

Still needed body to check whether the work optics are now and how. Close the cover charge, spin, insert the wire into the USB-output and what is it? Is stable, not jump! Everything is fine. Just noticed that the sensitivity decreased slightly, so moved to the Windows Start menu in the "Control Panel", find "Mouse" and changed little sensitivity settings.