Warming of the floor in the bath bottles, concrete block, uk, perlite, penoplex liquid insulation

Construction bath for many a challenge. Previously, the floor in the bath does not insulate. Only insulate the ceiling, that the heat did not go away. But a lot of heat disappears through the floor of the bath. How to make the room warmed up quickly, save on fuel? What insulation for floor bath?

The base of the floor in the bath - it lags or concrete structure. Make inclination of 10 degrees to water drained in the sewage system. The water under the floor can not affect the insulation with proper arrangement.

expanded clay aggregate

Made from natural materials. It has a low weight and excellent thermal insulation due to the porous structure. For warming the concrete floor is poured, is spread waterproofing (e.g., polyethylene) is fixed beacons from a metal profile and concrete block fall asleep. The layer thickness is not higher than 10 centimeters. Top - concrete screed. Then comes the flooring wood floor.

Penoplex

This material (foamed resin) is made of polystyrene. It does not rot, does not oxidize, it is easy to cut and bend. Penoplex but can be used if the temperature is not above 70 degrees in the bath. If the temperature is above this level, the material will begin to emit harmful substances that are dangerous to people.

If selected penoplex floor insulation, the course of action on the ground will be the following:

Reference numeral 1: the concrete plate, 2: reinforcing mesh with a mesh of 15x15 cm. Reference numeral 3: waterproofing.

Radiant floors

Is it safe to use them for heating rooms with high moisture? How to assure manufacturers uk suitable for warming a floor. With proper laying of electric shock and possible fire.

To put the film must first lay a substrate to make a ground connection. On the basis of concrete lay waterproofing and insulation film on it. Special tape, which comes bundled provides ground around the perimeter of the film. Above the glue film is applied and then laid tiles.

perlite

Expanded sand. Mix 2 with a bucket heater 1 bucket of water. You need to work indoors, to avoid drafts, as perlite easily shatters. The composition of the added cement grade 300 or 400. Fall asleep after stirring for another bucket perlite and half a bucket of water. Then stack ready solution on a concrete base and a thin layer is applied after drying the second layer of solution.

liquid insulation

Used for concrete or wooden bases which do not even need to align. The heater layer after curing becomes smooth and seamless. Lay polyethylene, then apply a layer of liquid insulation. Cover insulation hydroprotective frozen material from above and lay the board or other surface finish.

Insulation of the bottles

Create a warm floor in the bath will help to glass bottles. Free insulation cork. On the basis is laid horizontally and the bottle tightly to each other. Then he poured all a layer of sand and put reinforcing grid. Then comes the screed at least 3 cm. Next - finishing.

In details how to make the insulation of the bottles see the link.

Channel RemontDom: SUBSCRIPTION. Thank you for huskies!