Chopper for vegetables with your hands to give

Hello everyone Kulibin with you again next life hacking Mikhalych and improvised. Today we do chopper from the jars in half a liter. The cheapest, easiest to use and simple to outrageous.

You can use it for chopping carrots, cucumbers and other vegetables. And since I am a fisherman, then made himself a liter of banks, it grinds corn, sunflower seed cake and for bait, as the catch mainly on the feeder.

Wife still there often grinds the herbs when making salads or preparing refills for closing for the winter. In general, such a simple cottage version of the chopper for a penny.

So, take a jar with a lid twist, in this case the bank half a liter.

Next, drill a hole in it, exactly in the center of the lid.

It is important to remember. I took a drill diameter of 6 mm, drilled a hole slightly razvaltsevav it. Then, take the stud threaded with the same diameter of 6 mm, it is easy to enter the hole. The length of the stud should be 8-10 cm more than the height of the banks. And the diameter of the hole in the lid is not less than 6 mm. These dimensions are very important !!

Next, take the blade from the knife stationery with holes and screw it to the pin. The diameter of the holes in the blade approximately 5.2 mm, which is why it is important the size of 6 mm.

Next, as shown in the photo, cheat nut, it will fix the blade in place. The same nut cheat on the back side, but so far nothing has been delayed, because in the end it will still fit the whole thing.

Similarly, the following blade and cheat again set nut therebetween.

Simply install the blade 4 and the end to put the washer and lock nut is all-cap, but you can use a simple nut.

Now straighten the blades in different directions and all the nuts thoroughly stifle. Clamping start with the first nut, then set the second blade in the desired direction and traps the second nut and so on.

The length of each blade choose this to your design got into the bottle opening, then the smaller the distance from the wall to the banks of the blade, the better.

Close the jar lid, the hole which pushes our threaded bolt.

Next on the thumb, hold the pin in the screw gun and went to grind everything.

Now check the invention on a fresh carrot. Clear the skin from the top and put into a jar.

That's the way to work and our shredder.

Cover cover necessary, as all the contents of why it is very willing to fly out.

Well, that's the result of our improvised rubalki. It is worthy to homemade.

Among the shortcomings can be noted that the nut is not very well hold the blade in position, but even if they are displaced, then chop quality is not affected.

The blades of the shredder quickly rust if washed after each use, so I had them my own, then land a little and treat oil.

Important! After the operation, be sure to check the integrity of each blade. I grind myself Makuha fishing after work and discovered the chips on two blades, ie, those fragments somewhere in the cake. Fish are not important, but for a man to be a problem.

So gentlemen Kulibins which are thoughts on the device and which can offer options for improving or upgrading. Write in the comments, we will discuss.

In this farewell, waiting for your subscription to the channel and Like this article, unless you felt my efforts were not in vain)) All good and peace!

Interesting article on the opinion of the readers:

• You can not use WD-40
• Bolt with a lamb from a plastic bottle
• How to transfer the image to paper on a tree?