Important nuances while insulating the attic roof

How to insulate an attic and attic floor?

No heat in the house can not be a family cosiness, which everyone wants to feel in your home. Good insulation will not only save in the cold on heating, but also provide a comfortable climate all year round, including protection against the summer heat. Do not forget about such an important component of the internal works as insulation of the attic roof.

Warm air rises to the top and attic insulation will not let him out, and also allow comfortable to spend time there or to store things. Warming starts with steam and water proofing and ventilation everything - without it is impossible to install insulation quality. Vapor barrier is performed taking into account the overlap of the inner side to the warm air does not damage the roof structure: in the tree can begin to develop microorganisms and mold. Waterproofing provide protection from precipitation and mechanical damage, which is very prudent.

These works are carried out in the building in the last turn and only after the roof is given in proper condition, if required. Most often used for insulation attic mineral wool, which is a stone and glass. This material is valuable, primarily because of its flexibility, especially for insulation of attic slope. However builders often resort to expanded polystyrene and fibreboard, which are in great demand.

When installing the thermal insulation required wooden slats. If the rafters get thinner cotton layer, to improve the efficiency of thermal insulation, experts advise them to thicken. This will help wooden slats impregnated with a solution that protects against harmful insects and fires. It is best way to handle the entire roof structure including wool layers, which are placed between the laths of the roof.

Thermal insulation of attic floor requires special attention. To reduce heat insulation carried on wooden beams use different bulk insulating materials or having to roll and plate heat insulation. First, as described above, a vapor barrier is mounted. Wade foil materials and foil laid down. Before further installation is necessary to ventilate the area to get rid of excess moisture.

Note - useful advice when building a house!

Post insulation of external walls should be on the inside of the room and not from the outside, as some performers.

p.s.: I try to give you the most important, useful information. If you have been interesting and helpful place "like".

Construction and repair, construction of houses and apartments, interior design, landscape design, engineering for home heating, plumbing, building materials and tools, furniture, cottage - tips, reviews, and ideas.

Subscribe to the channel - in front of a lot of new and interesting information!