Protect the glass beaker from the whipping. So simple that he wondered

The principle of protection is taken from the production of cars, remember, the glass on the car after the bounce is not scattered, but is covered with cracks, it holds the film between the panes. In this way to protect the cans are vacationers who roll their vegetables for the winter, but the technology is much simpler and more accessible.

We started

Made himself a cup, used bottle of mineral water, the walls were thin, he decided to protect him for example gardeners. For this purpose, the bottom cut from PET bottles suitable diameter and put in a glass.

I began to blow hot air evenly using a hair dryer. The main thing that the glass and the bottle was dry, and then you can get small bubbles on the surface. And it is also important, sufficient length of PET bottles, then she sits down with the setting on the edge of the cup.

Here I have the hat, it just did not calculate anything wriggled not the first time. At the bottom of the plastic circumcised perfect, but with the edge had cut indented.

Now the glass has received additional protection, tightly crimping plastic and shockproof features increased significantly and even exceeded the impact load, glass fragments do not scatter in different side.

Remember that when the glass for safekeeping wrapped with tissue paper, it is easier to tolerate the transportation, and then plastic. This here is a simple but effective way.

Like put, those who thought that the test I "hryastnu" hammer on the glass, and that's really not. :)

subscribe to the channel, Share the publication with your friends, soon a new story. Your home renovation.