What will happen to gun foam, if you leave it with a balloon for 1 year. My case

Some owners pistols foam puzzled this tool washing, but other do not bother with this issue, and keep it, without washing with balloon. I belong to the second type of owners and do not remove the balloon after the cessation of work.

The result of storage in a year

My old man a gun, he was about ten years, the last time they worked last summer, and now decided to test its performance and zapenit slit in the box door in the barn. Not only that, A year of storageAs well as more the shelf life of the bulb expired in 2014 year in October.

Getting Started

Typically, a knife cut off the frozen foam with spout tool, unscrew the hammer stopper. And in an emergency I there is a thin steel wire a diameter of 1mm, and if at first the foam comes out bad, then clear my her.

Job

Moistened with water through the openings and zapenil dispenser, everything works.

nuances

1. When buying a gun once unscrewed and removed the reducer valve in the form of a metal spring and a ball, in my opinion, it interferes with the complete failure of the foam cylinder (pictured knife indicated where the valve is located).

2. It is important to keep the gun tank topSince otherwise the foam displacing gas can exit through a nozzle and then the balloon will abort.

3. Non-working state, the adjusting screw must be tightened.

Output

As shown by my example, the tool does not lose efficiency after such storage. Despite the delayed foam and an old pistol, but the choice is yours.

And how do you keep, with a balloon or separately?

subscribe to the channel, Share the publication with your friends, like, put Like, soon a new story. Your home renovation.