How to make a simple, adjustable wedge for 5 minutes. My story

I've thought of making an adjustable wedge, very convenient device, seen a simple design on the Internet and going to repeat it. But it turned out that I have no long bolts or studs with which this construction is collected and regulated.

And me I had the idea that in such a situation may be one, so I decided to simplify this device to a minimum.

Production of the wedge

A piece of bar, spaced diagonally fixed clamp and sawed off. It has turned two identical wedge drilled in the end of each one hole for tapping and treated with sandpaper.

inspection

I have a mini bench with sides of the bars, where home-made and checked. Put the plate, he drove wedges and screws twisted. Took the hand of the device, and raised it with the bench, it works, it keeps excellent.

pros

Simplicity, torsional design is heard even more, increasing the pressure effect.

Minus

In the limited space will not easy to get a long screwdriver directly to the two self-tapping screwsBut one sufficient to do the job.

Take note, it can be useful, as you will already have a ready solution.

subscribe to the channel, Share the publication with your friends, like, put Like, soon a new story. Your home renovation.