Unique fence paneling of pillars made of profiled sheet. Continuation

This season I have been a fence. A little behind schedule, but the minimum program I carried out - built the fence with the front side of the site. Refining columns previously engaged the fence erected from trapezoidal sheet and the mesh.

IN this article I have shown how it will look lined pole with decorative overlays "Washed concrete." Continued installation and now it is possible to estimate almost the final look.

In a very pleasant autumn day with the summer weather 25 gr. I completed the pillars of the fence from the grid:

Stoned pillars of the gate exit the forest. Sutures are still wet, sticking the foam, the type is not as presentable.

For mounting plates on the gate pillars had to be cut from the concrete element facet. marked elements

Bulgarka 2.1 kW cutting concrete almost like a butter knife over a grinder 750 watts. There is nothing to compare.

That would not fall off and lining them on the post do not push the expanding foam - pulled together, pressed wire to a post.

Difficult to assemble a corner post

It was necessary to establish a final assembly halves (height of the column coincided exactly with 4.5 pads). And plus the final element - a tiny pyramid-shaped cap, which is also sparkled.

When pouring the concrete lids in a long screw inserted. And when you install it on a pole screwed into the plastic cover of the metal pillar. Seam plastered and wash foam sponge with water.

The first four finished column. Fence began to look like a set of concrete pillars and metal sheets between them. Do not say that it is concrete lining on the metal poles.

Linings made has approximately 10 poles (half the sampling of profiled sheet). Dedicate time to fill these linings. Now the volume of concrete work associated with them declined. This is about 1 to 2 concrete bucket shape (4 linings). Concrete pouring for the remains of using tile for tracks. The same technology "Washed concrete."

The result is satisfied. But do not say that I am more excited. You may need to cover up the gap between the plate and the trapezoidal sheet. And also be sure to cover the nail on the stone to produce the effect of "wet stone". Then we'll see. But the nail is not yet brought into the organization, which bought the first 12 cans of 0.75 liters. I am waiting for admission.

***

Subscribe per channel, introducing it in the browser bookmarks. There is a lot of interesting information.