The unique three-dimensional art object with their hands. Step-by-step instruction

Good afternoon dear friends!

Agree, in the bustle of holiday and repair cases just need to distract and occupy yourself hobby more enjoyable and interesting. Therefore I propose to make an unusual 3D art object with their hands!

In this case, you will need quite a bit of money and your time. As a result, you will create your own unique piece! Which, firstly, will bring visual interest any wall in your house, well, and secondly, you do not have to to spend money from the family budget for the purchase of paintings, dioramas, sculptures and other decorative elements. And so, today, I prepared 5 simple steps that will help you create Wooden 3D object that is not inferior to modern works of art.

Believe me, in the end you will be surprised how talented your hands and your imagination is boundless! And let this be the first but not the last decent art object created by you in person!

1.What you need? First material - veneer sheet (60 by 80 cm) wooden bar 40 at 40, acrylic paint, adhesives for wood products, finishing nails and fixing ring. Further tools: a saw, hammer (stapler), screwdriver, tape measure, abrasive paper, adhesive cloth and brush.

And so, for a start take measurements and draw a line on the plywood cut to create a basis for your work of art. After prepare 3 kinds of neat "cubes" thickness of a block of wood - 3, 4 and 5 cm. In our case, it received 30 pieces!

2.otshlifovki details. Each resulting miniature "cube", otshlifovki need for a more even and defect-free paint.

And do not forget, on all sides, "wet" them sticky cloth to remove small chips and burrs.

3.Painting wood "cubes". Perhaps the most 'interesting', with immediately visible result, the creative process. Take the basis of a single color, such as blue. Paint them 1/3 "cubes", and the remaining 2 pieces will let its shades. Therefore, for the second batch, add more water, and for the third and does, make a solution of transparent blue.

Just leave a small number of "cubes" intact, they will overlap with a palette of blue, adding a picture expression.

4.Fixing the "cubes" on plywood. You can make a rigorous calculation and with millimeter precision to distribute details on the surface. Or you can act "by eye", building "blocks" in the process. The main thing that in the end turned out nice it is, your look, 3D project, which will harmoniously contact as the colors and heights. Once you are happy with the result, move in the direction of "cubes", without violating the integrity of the composition. Leave only one row and start sticking his plywood.

In this way, secure all "cubes", and allow the glue to dry according to the period of time in his instructions.

5.Framing 3D works. Once all the bars are assembled into a single three-dimensional composition, make for it a frame of remaining a piece of wood or a baguette. Glue it on the corners and secure the perimeter of the stapler (hammer), just behind the base of "cubes".

Keep in mind that the more often you will be "targeting", the less likely that the frame "will lead."

6.fasteners. Once the glue is dry, with a screwdriver or screwdriver to screw the back side work retaining ring. Congratulations! Your three-dimensional art object is ready!

And yet, when mounting it on the wall, consider pre-mounting position, because the weight of the product will nehilym.

Previously published materials:

How to make a banquette for the bedrooms with their own hands. 7 "simple" steps and 5:00

Why I did not throw away the table-book. 5 ideas for imitation

IF YOU these tips will come in handy, or liked the article, be sure to click "THUMBS UP" OR SUBSCRIBEON CHANNEL !!

Thank you for your attention and I will be glad your comments!