The most simple and easy homemade BBQ

Summer - time, not only for construction, but also rest on summer residences. But even if the building is still in process, the rest is also necessary. Many villa associates with barbecue and sauna. And the barbecue without the barbecue - it is difficult to imagine.

If you often cook barbecue, you need a handy grill (not a store of tin for 150 rubles. and half a meter above the ground). Order the production on high legs - it will cost a few thousand rubles. But it can be made BBQ yourself, even without much experience in welding. This manufacturing variant barbecue from the gas cylinder.

I heard about this option, but recently saw a neighbor. He is 700 rubles. bought b / a gas cylinder at 30 liters, carved lid welded legs and uses it not only as a barbecue, but also as a grill and smokehouse smoked.

I looked at this topic on the Internet. I found briefly share information, how best to make barbecue from the gas cylinder. First, you need to buy b / a gas cylinder. At 27 l or 50 l. Depending on the volume of cooking kebabs.

The first got classified. Now the summer season, 1 thousand cheaper. rub. 27 liter bottle to be found. 50 liters - 1,5-2 thousand. rub. In winter, it may be cheaper. Or to bargain.

There are companies that take gas bottles for recycling. Perhaps they buy a used / have a balloon will be cheaper.

1. Marking cylinder

It is necessary to cut the cover and make holes for air supply.

It can be done without the tube. air draft is not always necessary in a closed barbecue. The feet can also be of a different design.

Before work on the cutting cylinder, it is necessary to protect themselves from the gas residues that may remain in the cylinder. Turn off the valve and fill the tank with water:

We leave it with water for a couple of days. Further, not pouring water, making marks on the bottle line, which will cut the cover and slots for air.

If the container 50 L of the seam on the container measured from the 24 cm mark on each side and hold the line. The length of the cylinder circumference - 96 cm. It turns out that the cap is half the circumference of the cylinder.

Slot air intake is best done from the sides. Below are clogged coal and air for combustion of coal will not.

2. The lid and the air slots

Carefully cut through the grinder on marked lines.

But once the lid can not completely cut: after made back slot - welded roofs (loops) and then stops from the corner to the lid is opened to a certain position:

Next you need to weld the handle to the lid and latches to her that she does not sink inside the barbecue:

Catches lid can be made of steel strips are welded from the inside, or welded to the cover from the outside. A handle is necessary to weld with a wooden middle, that would be able to open the lid when it is hot, coals in the brazier. If the handle is fully iron, it will not take for it with his bare hands.

Next, mark up the placement of skewers and make them under the slots and openings on the opposite side.

If you use a grid instead of skewers, you can mark a place in it. But mesh width should be less than the cylinder diameter.

3. Legs for the barbecue

Barbecue must be sustainable. But too much of the metal is not necessary in the legs, it should be the same, and light enough that it would be possible to move or roll. Those. you can make it on two small wheels:

You can also make a small table to the entire structure.

A table can be folding.

Use can be rectangular pipe, square bar, or area.

In the manufacture of barbecue do not need professional welding skills. It can be welded as it is necessary, as "snot" clean grinder. The main thing is not to burn the body. At the same time, and some experience in welding can be obtained.

4. Painting

To grill looked like a factory product - it needs to be painted. This requires a heat-resistant enamel. Better black - will not be visible soot.

Some craftsmen doing combined cylinders, for what would be the top can be used as a tank for hot smoking:

It has optional.

Below - one of a plurality of videos, wherein all explained in detail how to make barbecue from the gas cylinder.

The plans to make a barbecue.

***

Photos taken from public sources, with Yandex service. Pictures

Subscribe per channel, introducing it in the browser bookmarks. There is a lot of useful information and interesting articles.