How to use light bulbs with power supply problems I found. unusual story
History really get unexpected. I went to the village poreshat his business and had to go to a familiar relative, promised to look electrician. from the conversation through the second arm I understood, what the problem in the wiring.
I look around the entry to the house and leaving the box on the counter cable input on the kind of normal. I look around the inside of the house with an open box of guns, not collected accurately, but to honor the master, all right, and the cable from the meter comes in a box.
Communicate with the owners and find out that they They complain about the poor performance of the refrigerator and weak heating iron, clear wiring to do with it - too low voltage. Ask incandescent bulb, I want to make the weak glow in his withdrawal, since anything with them not take.
The owner takes out the old lamp, which in some places rusty cap and says that they are 127 volts, but among them should be 220. Then selects one and says - this one, but the bulb inscription erased, and I look at it as among the grenade, choosing curriculum.
However, the homeowner does not listen to my strenuous objections, twists bulb in a cartridge with wires and includes the outlet, and in spite of the light in the hallway, it lights up unnaturally bright.
See, rejoices owner - 220, realizing what was happening, I find him a lamp that says 127, turn. He now will broads, but it also burns brightly and before it comes, the man he is intelligent, but stubborn. Everything is clear, the output voltage of understated true.
I advise him how to deal with the RES, let check the contacts or switch to another phase, since it is not my competence, otklanivayus, they escorted me with respect - electrician.
And I think that I have for such adventures fired from any job and would be right.
subscribe to the channel, Share the publication with your friends, like, put Like, soon a new article. Your home renovation.