As seal inflatable mattress with velor side without glue, through the patch, liquid latki

Air mattress is very comfortable thing. It is needed when the guests arrive. Some buy it for yourself, when moving to another city or take on nature. In such a useful invention is a minus - the mattress is easy to pierce.

When the mattress is assembled for a long time, on the ground bends may appear hole.

To find a hole punctured in the mattress you need to inflate it. Then turn off the TV or other source of noise and listen. If you have a puncture, you will hear a whistling sound.

There is another way to find a cut or hole. Inflate mattress and lower part of the water. At the site of the cut you see bubbles.

You can apply shaving foam on the mattress to look for cuts, punctures. The foam in the affected areas will bubble.

Some poured into the mattress a little water (2.1 liters) to find the damage. Less of this option - then you need a good mattress to dry.

How to seal the mattress on the basis of velvet

If you find a small cut or puncture, the damage quickly and easily seal the usual super glue. Just drip it on the spot, and wait a few seconds. Do not apply more than 2 drops.

If a puncture or incision is large, the repair in other ways.

Patch

Material used: children's inflatable mattress rubber cap for swimmers and others. You need to cut the patch so that it has no sharp edges. Better round or oval.

The patch need to make the size of the hole, but with margins of 2-4 cm. degrease the surface. To fit the shoe repair glue from Intex, PVC or a well-known moment. Apply glue to the damaged area and glue the patch. Dry the usual hairdryer.

Repair mattress without glue using iron

This method is suitable for those cases where the damage is located on the seam. Pull portion of the mattress through the valve. Degrease the surface and align the bottom and put a wooden surface. Covered with plain paper and iron with heated iron in place of the combined edges. Then remove the paper and turn back the mattress refurbished site.

The best way - liquid patch

First we need to wipe the surface with acetone. Then, from a tube to deliver the first agent layer. Wait 15 minutes and apply a second thin layer. After drying, the damaged area becomes the same as the elastic base material.

If a large cut, then before applying the liquid latki better to make the cut normal thread. Before application tube Shake well latki liquid.

Channel RemontDom: SUBSCRIPTION. Please Like - all good luck and have a nice day!