How to make a banquette for the bedrooms with their own hands. 7 "simple" steps and 5:00

Good afternoon dear friends!

For a long time you wish to pursue - «add something new to the bedroom» ? Or the same type, ordinary acquisition is not a joy? No problem!

I propose to challenge your ingenuity and intricate, and make for your "bedchamber" - banquette! Previously, they were in the private apartments every "respecting" the queen, then left with the era. But this matter can be corrected and create a royal atmosphere in which you feel like a special person! So today I have prepared 7 steps that will help you make the banquette own.

As a result, you'll have? Additional niche for storage and a place where you can sit or lie down. And most importantly - a sense of satisfaction from creating your own masterpiece!

1. What do you need?Of materials: chipboard sheets, batting, lining fabric, foam (8.10 cm thick), leather or fabric for necking a metal hinge, buttons (larger standard).

of the tools: Professional tailor (usual will not do, the level of work we are not following the true master!), Scissors, stapler with spare set of brackets tape measure, Kiuru (for ordinary people - a hammer, but not for us professionals!), a huge needle for sewing, drill-screwdriver and glue furniture.

2. Production of boxes. The first thing to make the repository. With chipboard sheets and screwdriver-drills Construct duct (4 side and the bottom) of the lid I will later. Dimensions will not advise as they are each individual. It depends on the size bed and squaring the bedroom itself.

3. Compound batt with fabric. Given the desired size, you need to cut the fabric and batting, fabric take on the 3-4 cm wide. Using glue, connect the batting and fabric together.

Be prepared to provide space for this process.

4. Wrap the outside. Floats your dexterity and a stapler. Because the next step is the most crucial - you will need to obtyanut box. Secure the stapled skin edge in the middle of one of the long side and then carefully tight, fixing the fabric in place the "Start".

Fold the edge inwards and go around the perimeter of the stapler.

5. Wrapping the inner. It is also important to refine and inside of the benches, because there lie your things. According to the principle of the external encapsulation, secure the inside fabric.

Only use the correct adhesive is because the texture of the lining fabric thinner.

6. Creating a cover. Sheet of chipboard and diversified and provide space for the buttons. Using glue to fasten it foams. And do the same upholstery fabric with batting. On the wrong side of the cover is made holes, needle pull the thread and fasten buttons, fabric bending waves at will. After gently turn in all the extra lengths and fix a stapler. Finally, close the work surface chipboard lining cloth, which was previously placed inside the box.

For convenience opening left fasten metal hinge to the wall and cover.

7. Assembly. Connect the box to the bench. To this end, the bottom of the lock to the base of the bench with a drill-screwdriver. Height up to you. If the bench legs are low, the box just add the desired height. If not, then simply tighten up their bit.

Bench is ready! Open a "new horizons" and quenched their creative desires!

Previously published material:

Why not get rid of the old grandmother's cupboard. 6 practical solutions

IF YOU these tips will come in handy, or liked the article, be sure to click "THUMBS UP" OR SUBSCRIBEON CHANNEL !!

Thank you for your attention and I will be glad your comments!