How to clean up the garden invertar
An instruction to create a cheap and, at the same time, a simple stand for garden tools. With this solution the entire inventory accurately located in one place, rather than scattered, as it usually happens.
How to make a shelf for tools
materials:
- The reception was made of wood, which can be found at the farm.
Tools:
- 32-millimeter perk, for drilling
- Hacksaw
- Roulette
- Sandpaper
- Punch
- Pencil or knife to mark
marking
In our situation it was to stand instead of 7 tools (in your case it may be more or tools). The width of the guide boards was 63 mm, the calibrated orifice at a distance of 25 mm from the edge of the board to the center of the hole. Then, the angle is marked. Cm. a photo.
Drilling holes (jacks)
After the marking has been made, and the holes are drilled with a hacksaw saw through from the edge to the opening. So we turned groove.
Then you can stand ready to paint as the paint and conventional stain or varnish.
Stand ready for garden tools
Thus we get a rack of equipment. Now, your inventory will be carefully laid out and easily accessible, and most importantly, such a stand decorate your shed or workshop.
More solutions for the organization of space for garden tools:
That's interesting, but as you store the tool? Tell in comments!