Fastener tricks, repair life hacks: unscrew the nut, bolt without keys, remove the anchor from the wall

If you often have to use bolts, screws, nuts and other fasteners in your work, then it will be useful to learn little tricks.

For example, it is difficult to remove a rusty bolt. Heating with a blowtorch will help with this. Heat the bolt and then you can easily unscrew it.

If you don't have the right wrench for the size, there is one trick to fix it. Just slide a coin into the hole:

Unscrew the bolt without a key

A wrench is required to loosen and tighten the bolt. If you don't have the right tool at hand, a simple method will help.

With the help of a stud and 2 nuts or a bolt with a nut, you can make any key in a minute.

Tighten the nut so that the head of the bolt is tightly tightened. For small fasteners, take a nut with a smaller bolt.

How to remove an anchor from a wall

This fastener has become popular lately. It can withstand significant loads. How to get it out of the wall? Some advise you to simply hammer or cut it flush with the wall.

Most often, the anchor is pulled out as they say "with meat". The large hole is then sealed with putty. Therefore, before installing such a fastener, think carefully whether you need it in this place.

To pull out of a concrete wall, first unscrew the anchor nut and then punch the stud further into the wall. Then pick it up with pliers and pull it out over the edge.

If no method helps, drilling will solve the problem. Use metal drills for this purpose. After such exposure, the spacer mechanism can be pulled out.

Channel RepairDom: subscription. Thanks in advance for the likes, thanks!