How to quickly replace the tiles without damaging neighboring tiles

Repair in the bathroom, the kitchen, the bathroom, the hallway is made, but there was one trouble: one or more tiles were damaged, scratched. Time did not notice a defect, those who make repairs. Today will tell how quickly replace the tiles without removing the entire cover.

Ceramic tiles popular decoration material. It looks great on the floor, the walls. It so happens that the repair is made, but wanted to add a decoration or to remove damaged tiles and replace with a new one.

It does happen, it is necessary to make out part of the wall to replace the pipes, move ventilation. Another wanted to add or replace the decor of the same size. The reasons may be different.

No need to re-shift the entire tile. See a way to quickly and easily remove the tile and replace the new one.

Replacement of one or more tiles

- Prepare the. If you need to replace the tiles in the bathroom, you need to cover it. Close the sink, floor, to prevent debris from falling.

- cutting seams. There are several ways to remove the stitches. apply special

knife (Scraper) for stripping or grinders.

Scrape better care not to damage the glaze other tiles. Grout clean up is not a lot and adjacent tiles.

- Stationary knife We spend more at the seams, to permanently remove all the grout.

- Through chisels and hammer We will clean the tiles. But do not do it with the edge of the tile, as neighbors may suffer.

to drill a circular hole in the center of the tileYou want to remove. Do it better, using a drill with a diamond crown.

If you want to stay in the tile without damaging it, just remove the seams, as mentioned above. Remove the tiles without damaging the turn, if you have recently made repairs (up to 7 days ago). Next, you need a screwdriver to pry the tile or spatula and gently tapping with a hammer.

- From the center of the tile, on all sides remove the tiles in parts. Remove the remnants of the old adhesive trowel. Replace plasterIf it is damaged during removal of the tiles.

- On new tile put spatula glue and carry out a comb (notched trowel). Mount the new tiles on the place of the old. Press the tiles to the wall moves to the left - right, down - up.

It remains to wait until the glue dries and then fill, wipe grout joints. This way you can replace one or more of the tablets after or during repair.

Channel RemontDom: SUBSCRIPTION - zen.yandex.ru/remonts. Thank you for your attention and huskies.