There was a canister from under the primer. I made a simple homemade product out of it, which helps out at a construction site and on the farm.
When carrying out construction and repair work and not only, very often remain plastic canisters for various liquids.
Usually they don't stand on ceremony and just throw them away.
But in vain!
Plain plastic canister it may well still come in handy on the farm, you just have to be smart.
For example, from a canister from under the primer can be done the simplest but useful homemade product. How? Consider below.
For making homemade products we take a canister with a volume of 5 liters and using a marker markup on itas shown in the photo below.
It is also quite possible to take a canister and a larger volume, the manufacturing principle will be the same.
Then make several holes on the marking line using a screwdriver, to make it easier to start the sawing process.
Using a hacksaw blade saw off the extra parts of the canister according to the markings.
After the excess parts of the canister have been removed, we cut off the burrs with a clerical knife.
And we proceed to form the handle from the narrow part of the canister.
To give a handle rigidity, we use a piece of the guide profile, placing it under the handle.
Then, using electrical tape wrap the resulting handle.
The result is easy and convenient carrying for building materials and tools. If desired, of course, it can be upgraded further, for example, make compartments. But...
Since the volume is small, it is more convenient to use this option. Simple and versatile.