How we built a dome-house in Pomorie. The foundation goes into winter
Round USHP, "triangle" method, communications, reinforcement
A new story of FORUMHOUSE in a first-person cycle, as usual, about construction. Also a friendly family row in the literal sense of the word, the house itself is unusual.
Magem
FORUMHOUSE member
We are building a dome house in Arkhangelsk.
Foundation preparation
We have a long winter. There is no gas. We are building a warm foundation - USP. The turf was removed with shovels, it turned out to be long and not profitable. The children came up with the layout of the rooms.
The loose layer was rammed. We put stakes in the center and on the axis.
All other points were marked from the stakes, using the "Triangle" method.
We buried the sewerage system and the sleeves for electricity.
They drilled a well - it will be in the house.
We will install a septic tank "Tank 2.5" with an overflow well and a filtration field for a high level of groundwater - 1.5 m.
In the sleeve of the HDPE pipe, we will push the cable for the pump.
The sand pillow is ready.
- Thickness - 300 mm.
- The surface area is 185 m².
- Volume - 54 m³.
Installation of EPS
We lay the extruded polystyrene foam.
Sawing polystyrene foam with trimming.
The second layer of EPS was laid. We knit the reinforcement.
We tied the rib reinforcement and mounted the sides.
Closed the foundation for the winter.
Support the story, like it!
House-dome in Primorye
- DIY Good Karma
- The foundation goes into winter
Subscribe to the channel, we have prepared a lot of interesting and useful publications. Make a repost in your social networks, for sure, some of your friends will find this experience useful! Join the FORUMHOUSE!
How do you like this version of UWB?