What better Filament or SMD LED Bulb

Now if you go to a specialized lighting store, then you will run up my eyes, the choice is huge. In this article, we will compare Filament and SMD LED lamps and tell you about the pros and cons of these lamps, as well as in some cases it is better to use one or another form. So, let's begin.

Compare SMD and Filament

Note. In this article we will not delve into the technical component of these technologies industries two types of lamps, and consider only the fundamental difference (which is necessary in principle when buying products). If you are interested in more detail to find out about the production technology is on our channel has a separate article on this subject.

Before we understand that it is better to choose specifically in your case, you need to know what is the fundamental difference between these lights and let's start with SMD Led.

So, in essence SMD - LED lamp is a classic, where the LEDs are arranged on a special platform, which also serves as a circuit and heatsink.

Layout parts quite tight, but space is enough to accommodate the high-quality driver that provides high-quality food without strong fluctuations.

The production technology is well established, and if the manufacturer is not saved on the radiator and the driver, while the operation of such lamps can be up to 50 000 hours. Perhaps the only significant disadvantage of this type of lamps is that they have a narrow light flux.

Of course, using a partial matte flasks dispersion light beam, but sometimes this is not enough.

If we consider Filament Led lamp, in this case, a completely different arrangement of the LEDs principle. They are located on the so-called filaments, which are top coated with a layer of phosphor.

This arrangement allows to leave from the direction of the luminous flux in principle.

"Achilles heel" of such lamps is working cooling LEDs and drivers. Thus if the producer saved and instead an inert gas pumped to (in a flask) is not clear that, when the LED will overheat due to poor cooling. That will necessarily lead to the degradation of LEDs and very soon they will be burned. But before this can go wrong driver which is built into the base bulbs.

Note. Quality Filament Led can not be cheap, in principle, as good lamp filament yarn is collected on the basis of ceramic or sapphire film. In the cheapest models used ordinary glass, but it is extremely inefficient heat dissipation.

Also in the qualitative models special injected inert gas into the flask, which removes heat from the working LED to a glass flask, where the dispersion of heat dissipation. If there (inside the flask) pumped ordinary air, then overheating is provided.

Where better to use any lamp

Now, let's say a few words about the cases in which it is best to use one or another type of lamps.

Here the choice is here in this way, if your house is worth a beautiful crystal chandelier, where the good old light bulbs previously used with a tungsten filament, the LED lamp SMD type will not only spoil the aesthetic appearance, but also will give a rather abrupt and directional light.

In this case, the ideal Filament lamp, which, when not immediately be distinguished from light bulbs Ilyich.

In other cases, if you just need to highlight the work place, the ordinary LED lamp out of the competition.

Advantages and disadvantages of SMD and Filament lamps

Any product has both strengths and weaknesses, and for the correct choice, you simply have to know. Let's start with SMD:

pros SMD

1. High energy efficiency.

2. Reasonable price.

3. Strong enough body of polymeric compositions.

4. With proper as is long enough.

5. Maintainability.

6. Sufficient cooling in models that use a good heatsink.

cons SMD

1. A narrow light beam.

2. Aesthetically unattractive, if used in classic chandeliers.

3. If the wrong positioning of the striker emit directed light beam.

Now let's go over the advantages and disadvantages of Filament lamps

pros

1. High energy efficiency.

2. Uniform light output.

3. Classic, many familiar form of the flask.

4. A sufficiently long service life, with high-quality components and correct operation.

5. The emitted light is bright but does not hurt the eyes.

6. Can be disposed of with general waste.

disadvantages

1. The price of high-quality models is significantly higher compared to the SMD lamps.

2. glass casing, which means that it can break (brittle) under mechanical loads.

3. These types of lamps are not reparable in principle.

4. Poor cooling in cheaper models, which leads to a very rapid failure of the product.

Knowing the pros and cons of the product, and that's where the best fit one or another type of LED lamps, you can choose exactly what you need. If you liked the article, you will appreciate her huskies and thank you for attention!