Winter is coming. Solid fuel boiler will heat your home

Dear friends. It would be desirable to share experience solid fuel boiler installation, operating on fuel in the form of wood, as well as coal.

This year decided that it would be desirable to come from time to time at the cottage in winter, to go to the bathhouse, and generally escape from the city. The thought occurred that need is not expensive, but it is effective to heat the house of two rooms, one of them a bedroom and the other at the moment seems like the kitchen. I had to install two radiator in each of the rooms one by one.

Connect the battery had to polypropylene, reinforced pipes with a diameter of 25 millimeters, for a more rapid warming of the room to warm up the house, it is not necessary to heat for days. The boiler has a special hole with a 1/2 ", where I set the temperature sensor,

as the need to monitor the temperature of the liquid in the boiler and in batteries, respectively, in order to avoid an emergency in the form of boiling antifreeze that I decided to pour into the heating system.

All of course want to know why you can not pour water, of course you can, but at temperatures below freezing outside, there is a possibility of its transformation into ice, which further destroy the radiators and pipes, and boiler is not likely survive, and burst. I recommend to fill nezamerzayku another word (coolant).

Now we go to the main part, directly mounting and installation of the equipment. We need from the soldering tool for polypropylene pipes, special scissors for trimming length installed lines and different angles, special grease to seal the threaded connections and linen respectively.

After all prepared, you need to choose a location for the radiator and fix them. I chose this place at the window, because here there is heat loss most. Once secured to the floor of the battery, summed pipe and mounted in the return line circulation pump.
The circulation pump was acquired after the purchase of the boiler, for more efficient circulation of the coolant in the heating system at home.

In addition to all that was purchased and installed or missing the last detail, I decided to make their own.
Expansion tank. This is a separate part of the heating system is required in order that the liquid be moved by batteries without air.

In the presence of air pockets, so the term is called, in the case where the radiators do not heat is required to pull the air through special valves installed in the battery tubes. The tank was made of the usual ten-liter canister with the use of the pipe.

Taken capacity and cut off from its bottom, whereupon it becomes the top. The cover is a hole for connecting the canister to the pipe coming from the heating system, after which all secured together by O-rings and elastics.

Fill fluid in the expansion tank before the stop level approximately 1/3 of the capacity of the barrel, the circulation pump into the wall socket and wait when all the air out of the system through the valves radiators. After that, you can sink and enjoy the warmth and comfort of our home. #heating private houses

p.s .:My HouseHe is trying to give you the most important, useful, interesting information.Subscribeon the channel - is still to come!