Self-replacement toilet with mounted tank on modern equivalent

Instruction for beginners plumbers

Replacing the toilet on their own often guarantee money savings, but not time. However, as the saying goes, better to learn from others' mistakes. To meet as soon as possible will help a few simple but essential tips. To start a home arsenal is necessary to collect the necessary tools. In the present case involves the exchange of a toilet tank with mounted on a standard outdoor counterpart.

What tools are needed?

At hand should be:

1) Bulgarka metal disk;

2) Spatula;

3) for sealant gun;

4) the wrench;

5) hammer;

6) slotted screwdriver.

Dismantling of the old design

To begin, remove the mounted tank. Most often, he bolted soured "firmly" with bolts, so easy to get rid of them will not work. Trim grinder.

If on top of the drain pipe are water, then it will not be able to pull out. Saw and carefully remove it in order not to damage the cold or hot water.

The predecessor of the new toilet is installed turned on taffeta - a wooden board, which has rotted safely. As a result, the bolts on which it was fixed, extracted with bare hands. Old slugger cement hammer. We pull it out of the bowl. We take out "sidushku". In the presence of the full range of instrument procedure will take up to 30 minutes.

site preparation

The void left by the removal of taffeta, fill with cement. Brand: M200 or M300. The cement mixture is sold in any store a profile. She chooses not to bother with the addition of extra "ingredients". Pour the contents of water remains. The proportions will be listed on the packaging. On average, it will leave 1-1.5 liters per 5 kg. The solution is mixed until it was uniform and dense. Put the base. Leave to dry. For a day.

corrugation to sit down in advance to save time. Silicones will take time that the connection was strong. Be sure to check if the cuff is scrolled. Otherwise, it picks and feces will flood into the apartment.

Installing a new toilet

Toilet area is traditionally low. The construction of toilets Soviet type involves the installation on top of sewage sludge. In today's products, most commonly used flute, and it "eats" the already limited space.

Therefore, before proceeding to the final stage of installation, make sure that the door to the bathroom closed freely, and in the operation of construction knees will not balk at it. Ideally, to avoid embarrassment, all measurements should be made before the purchase of a new porcelain other.

Plumbers recommended to put it on the dowels, for greater durability, but this is purely situational. If the drill floor is problematic, it will be of sufficient quality to fill the base with cement. Totter will not be anything. We reserve cemented structure at night. Will remain set in the tank valve and connect it to the "network" Water set. Step by step instructions for its installation is included with the product.

final costs

In principle, everything is ready. Can be used. A specific type of work spent about a thousand rubles. The cost of the toilet bowl and tools (most of them can be found in the pantry or borrow from friends) are not taken into account.

Approximate estimates:

1) 10 kg of cement mortar - 110 rubles;

2) Reinforcement - 420 rubles;

3) Corrugation - 250 rubles;

4) hose for water connection - $ 100;

5) Sealant - 120 rubles.

p.s .:My HouseHe is trying to give you the most important, useful information. If you liked the article, please put "like".subscribe to the channel - in front of a lot of useful and interesting information!