Comfortable and stylish bathroom: Installation for flush mounting

Features of the latest generation installations

Modern bathroom, especially, in a private house, it is not just the basic minimum sanitary equipment for hygiene procedures. This is the most comfortable and presentable place that each owner is trying to build in the best possible way. This is not surprising - the current pace of life in the city come mainly home to spend the night, and in the country daylight passes on site. But here and there, the bathroom was, is and will remain one of the most visited rooms for quite natural reasons. So you want to enjoy a comfortable fixtures and see around a pleasant environment, whatever the skeptics argued. And with the advent of the possibility of improvement of installations bathroom greatly enhanced even through the first models. That can offer the latest generation of installation, consider together with a specialist company Viega.

Content:

• What are the installation: a useful sanitary equipment or "whim"
• The advantages of modern installations
• Answers to questions from participants specialist portal

Why do we need to install and if necessary

Installation - mounting frame is designed for fixing the suspended fittings (toilets, bidets, sinks) concealed manner. That is, the outside of the wall is only a bowl, and buttons, while all the "internals" are behind the wall, and do not spoil the look of the room. Depending on the structural elements, the installation can be of two types:

• block - for the installation of a reliable base, suspended on the anchor;
• frame - for floor mounting, there is no possibility to hang on a sturdy wall.

Frame design allows to install plumbing in the false wall or partition of the GCR honeycombed, plus a greater range of height adjustments, if necessary.

Although opponents have installations at least, if not more, than the supporters and followers of the "classics" consider their "temporary whim," the arguments in their favor powerful.

Faza74

Member FORUMHOUSE

installation idea I really like. Made repairs in the bathroom parents: the entire layout drowned herself in the wall, the place became more. Clean the floor under the hanging bowl is also more convenient. By the nature of the current activities (property manager), I often encounter with the plumbing. Where being overhauled bathrooms, we try to implement the installation. It is clear that not everywhere, but... The design of reinforced concrete, vandal proof, especially when our narodtse. How many after the holidays in the bathrooms was posvernuto tanks, though like managers, "white-collar"... Therefore, we are implementing the installation.

That is, it is not only about the visual component, for which will have to pay the extra amount, but of practicality. For ease of cleaning the floor under the hinged cup can be added with no need for this cup to remove traces of the benevolence of furry pets, have them, he will understand what I mean.

The advantages of modern installations

The first branch of the forum dedicated to the mounting frames, dates back to February 2011, it is natural that the first generation of simplified design (for our country) and modern - two big difference. Today it is not just the "bare" frame with the technical holes for fasteners and components, and user-friendly and practically assembled "designer".

Sergey Vitreshko

Chief Technical Officer of the company Viega, Russia and CIS countries

The new system for hinged plumbingIt developed based on years of practical experience and advanced technical solutions. Simplicity, ease of design and installation: the system can be assembled virtually tool-free, and the output of the user to ensure complete comfort. For convenience, the possibility is provided as a "dry" and "wet" finishing (with the bricking). The innovative range includes:

• mounting profiles;
• facing panels;
• modules for the wall fixing plumbing suspended without bricking;
• Blocks concealed installation with walling.

One of the most important elements of the installation is considered to be a tank.

Alekca

Moderator FORUMHOUSE

In principle, the "installation" refers to the product as a part of the metal frame and tank flush-mounted on this frame. Therefore, the quality of construction should be judged by these parts. Frame itself is something to be desired with the fixing elements of height and the wall. For example, a well-known brands, versatile frame for installation on the main wall, frame partition, the opening reception sewage ...

Sergey Vitreshko

For full compatibility, and ease of installation as the dry method, and bricking a main accessoryinnovation systemIt is a universal cistern - one for all models within the range. It is mounted without tools and is compatible with all the flush button.

Regardless of the brand, modifications and design features, the control - buttons (panel), always stay in sight. And this is a case where the decorative goes hand in hand with functionality and assess the need both. As in conventional toilets in key installations are both dual-mode and full flush. But if the classic tanks are equipped with only the simplest pneumatic, then the installation occurs and touch control. Moreover, variations in the choice of not just a few, but many.

Sergey Vitreshko

To select individual buttons to flush the toilet or urinal is convenient to useconfigurator buttons- a choice of more than fifty different flushing panels (for toilets and urinals).

Answers to questions from participants specialist portal

When it comes to seasonal residence time, the question of preservation of sanitary equipment - one of the most important factors when choosing.

mrmaximas

Member FORUMHOUSE

Building a bath with bath, operation as usual, seasonal, winter promorazhivaemaya bath. There was a question of choice toilet. As it dry in the winter and to conserve, I more or less clear. But there was a crazy idea, to put in place the toilet with a tank installation with outboard. Is there any experience of drainage installations? Merges whether one water through during flushing? Or my thoughts far removed from reality?

Sergey Vitreshko

Current products of the company are not intended for use in areas where there is a possibility of a negative temperature. Therefore, even if it is possible to drain the installation to finish, there is a risk that the water will remain in the components of the cistern, such as an angle valve, flexible hoses, filling or flushing valve flap, which, respectively, may cause damage to equipment.

Also interested in the problem of creaking.

chicken-A

Member FORUMHOUSE

We suspended toilets have a problem - creaking under the load of a person's weight. This convinced himself when visiting one zabugornogo home, where they found four pieces, and quite expensive models. And it's pretty loud creak. Perhaps this is the result of mounting errors? Or need in advance to attend the installation of some exclusive creaking pads?

Sergey Vitreshko

Any elements for overhead plumbing meet European standards, which allow maintaining the maximum load of not less than 400 kg. The emergence of extraneous sounds caused by friction at the point of contact with the toilet tiles, if the latter is laid flat enough. This sound has nothing to do with the strength of fastening elements for the toilet and the toilet is a result of improper installation. To prevent the occurrence of such sounds, we recommend using sound insulating seal is installed between the toilet and the wall.

And the modification selection under difficult conditions.

seriega

Member FORUMHOUSE

Advise what to choose in terms of reliability of fastening, ease of installation and low noise (comfort) use. Requires the installation for a suspended toilet. Purpose: To minimize false toilet block with a depth at the installation that the rear wall in 1/2 bricks.

I've thought of these options:

• Self-supporting (that by cutting a piece of the wall thickness of 1/2 bricks inserted in the recess). True confuses that different manufacturers of different depths such installations (150 to 300 mm). There are doubts about the sustainability of such designs t. To. When used on mounting feet will come sickly moment ...
• pristavit installation thin (85-95 mm thick).
• a reservoir unit which is imbedded in the partition (precut window for it).​

Sergey Vitreshko

The optimal solution in this case is set concealed cistern in conjunction with a squat toilet, since we consider here the minimum thickness of the rear wall (1/2 bricks). For such a thickness is not suitable for use for overhead plumbing elements (installations), because for their installation requires reliable rigid wall.

Output

The advantage of modern installations is the ease of installation - system mounted plumbing is going almost without the use of special tools. A hinged plumbing in general, it is aesthetically pleasing and practical.

you can read about in previous articles choosing a toilet and the correct wiring of communication in the bathroom. Originals - how to make the shell of the tadelakt. In the video - Master class from an experienced plumber Installation of water supply in the apartment.

Subscribe to the channel! become members of FORUMHOUSE - the main domestic resources for the construction and country life!