A circular saw. Simple things for beginners

Once with a friend worked part time at the dacha of his friend - do households block or easier - good barn. And so long as I did with great surprise I found out about the possibilities of manual conveyers has a very vague idea.

Even then I realized that many beginners are either unaware of the possibilities of hand-conveyers, or do not use it to the fullest. But it is a tool with great potential.

A common occurrence when a person takes a chainsaw, saw off the board in the construction or sawed wood. And that is all...

But almost all hand-held circular saws have the ability to set the depth of the cut, and it is possible to adjust the angle of the cut.

For example in the construction of the host unit, I cut off the edge of the board at an angle to skin. And due to such cutting boards can be nailed overlap, and the wall was obtained at the same level.

(Cut corners to go later as flat strips between logs log.)

When you set up the angle of the saw is worth checking the angular scale, since it is not always accurate. Or enjoy gon with proven angles.

Also on the host unit I had to make a couple of doors. And here was useful opportunity conveyers adjust cutting depth.

The board these doors arranged vertically to the entire height of the door, and fastened the boards transverse dowels. Groove to these keys do manual circular saw.

Cutting depth is convenient to adjust the angle bar with a ruler.

Another example can be useful when setting the depth of cut.

Task - cut a veneer sheet 10 mm thick. To cut a strip of 60 cm.

To begin with certainly made markings. Along the lines of markup clamps mounted flat bar or plywood - this as a guide. And of course this guide is necessary to strengthen the indented so that the saw blade held on the markup.

And we could saw off but... Often these things on the bench sawing and cutting line can be positioned on the edge of the bench to drink anything extra is not touched. And you can set the cutting depth of 11 mm and placed under the plywood slats couple unnecessary. And saw off peacefully, without fear of damaging the bench.

And it's only a couple of examples of the use of standard features hand-held circular saws.

Thank you for reading.

I will be glad of your support in the form of a husky and a subscription to the channel.

Alexander.

Other publications in the channel:

Simple grinding drum. My version.

Sanding wood before finishing. recommendations

As to the circular saw to make a decorative cover

On a note: All the articles of the channel based on materialsmysite -"Joinery"