Methods of installation of wiring in a wooden house

There are three ways of mounting the wiring in a wooden house:

1. Installation in cable channel. This is not a concealed installation is made on the surface of the walls. It has a rough look (in my subjective opinion). But while all this is the budget wiring methods.

2. The so-called "wiring antique". This is not a budget option, but quite expensive. This type of wiring is suitable not for everyone. And not only on price but also on the specific design.

3. Installation of hidden wiring. It is the most expensive type of wiring installation in a wooden house (laminated veneer lumber, shaped beam, beam). In this arrangement in the body wall of Technology drilled holes into which steel pipes are laid, which stretched wires (labeled ng - not flammable). The nuances in this installation - sooooo much! And here it is important that such an assembly-tested people spent. For example the following fact: as the calculation of the shrinkage factor of the house when choosing the size of the pipe. This is to ensure that the steel pipe does not interfere with uniform shrinkage house.

Thank you for you for reading this article to the end!

In order not to miss new articles subscribe to the channel!

Like put, if this post was helpful to you!