How to turn a drill machine in a carpenter: a tool with their own hands

Probably many of you will agree with me that living in your home or in the country, often have to work with wood. It is necessary to saw firewood and fence repairs, and the stairs to do.

In this review I will tell you about woodworking tools, which can be made with your own hands. (How does this work will show at the end)

For working wood, each host in the arsenal, there are many different tools.

These include hand saws, jig saws, circular saws, in general, all those toolsBy means of which can be sawn board or wooden beams.

The author proposed an interesting idea of how you can effectively transform an existing tool and get the product to the new functionality.

Prepare a wooden frame for turning the drill in a joinery machine with their own hands

Joiner machine on a review of the usual drills their own hands.

Idea

Grade 5 of 5

As already mentioned, quite often we have to work with wood. To do this, use a different tool. Someone uses a hand saw, someone can afford jigsaw or circular saw, and someone does not spend money on a woodworking machine.

instagram viewer

In my opinion, the author turned out to design a tool with their own handsWhich can perform completely different manipulations. For this author put 5 points.

Design

Evaluation 2 of 5

The basis structure of this device is a drill that is attached to a wooden frame using a standard handle of the drill. For the stability of the structure the handle is attached to the frame with screws.

Further attached to the frame author desktop made of a thick piece of plywood. Folding table made by attaching it to the frame via a door hinge.

For the normal rotation of the saw blade narrow opening was made in the table. Also in the table author I made two more narrow holes, arranged perpendicularly to the disk blade.

Installing drill in the design prepared by your own hands

In these holes with bolts fastened the wooden rail, which acts as a guide and the limiter blade during operation. Disc saw blade is mounted with the bolt and bearing.

The main disadvantages of this design I think the lack of a protective casing on the moving saw blade. As well as the absence of blocking drills at jamming the disc. That is, to work with this tool is not safe.

Design

Evaluation 2 of 5

Joiner machine from the usual drills author left without paint. Therefore, only 2 points.

analogs

Grade 5 of 5

Analogues of this instrument is a circular saw and woodworking machine.

The cost of these tools starts from 3000 rubles for a circular and from 5500 rubles for a small machine.

The invention of the author it is possible to apply for the production of raspilochnyh works.

Thus it is easily transformed into a back drill. Very economical and ingenious solution! For this author receives 5 points.

Total

Grade 13 20

Joiner machine from the usual drills their own hands gaining 13 points out of 20. It should be noted that this machine will be a good helper in the shop, but provided that you have made all the safety measures.